-
MODULAR
- 600W
- Platinum Efficiency >92%
- 100% burn in cycle
- Single High Power 12V rail - 50A
-
Near silent operation
- 3 year warranty
- Silicone loom
- ATX3.0 Complaint
- Native 12VHPWR connectivity
ENP-7660L is Enhance Electronics' second modular power supply, finally taking everything that was great about the ENP-7660B and plutting it into the new 165mm long case that the 450W modular uses ENP-8345L.
Looking at the array of modular connectors its easy to get lost, but working from Left to Right they are as follows.
- 3pin header voltage sense lines for 24pin ATX connector
- Native 12VHPWR connector GPU
- 14pin to 24pin ATX connector
- 12VHPWR connector for CPU
- 4pin Peripheral connector (3.3/5/12V/GND)
Included with the new model will be an extensive cable set that includes
1x 24pin ATX loom 18cm
1x 24pin ATX loom 35cm
1x 8pin CPU power 40cm
1x 8pin + 4+4pin dual CPU power 40cm
1x 12VHPWR 25cm
1x 6+2pin + 6+2pin dual PCI-E 25cm
1x 4pin to dual SATA 40+10cm
Just a single ATX, CPU, GPU maybe used at any given time but allows the power supply to be used in a wider range of cases and system configurations.
Special feature, not currently shown, but eagle eyes may spot the 2 places where 2 x 2mm pitch PS-ON feed through connectors will reside.
Completely optional to use they enable PS-ON to be daisy chained through for multiple PSU based applications. For example, 2 (or more) PSU's maybe used in one system with one dedicated to GPU alone or perhaps a GPU is used externally or other 12V power devices with its power up status being sychnonised with the main controling system via the PS-ON link cable.
Model: | ENP-7660L-OVT |
Wattage: | 600W |
Dimensions: | 165mm (L) × 81.5 mm (W) × 40.5mm (H) |
Efficiency: | Platinum Efficiency >92% efficient @ 50% load, >90% efficient@ 100% load |
Input Specs: |
Voltage: 100 to 240Vac (115/230Vac) Frequency: 50/60Hz Current: 8A / 4A |
Output Specs: |
3.3V @ 15A 5V @ 15A 12V @ 50A -12V @ 0.3A 5Vsb @ 2.5A |
Protection: |
Over voltage protection Overload protection Short Circuit protection |
Core Modular Connectors |
Connector 1 GPU - Choice of cables 12VHPWR or dual 6+2pin PCI-E 25cm Connector 2 ATX - Choice of 18 or 35cm cable Connector 3 CPU - Choice of single 8pin or dual 8pin + 4+4pin 40cm Connector 4 Peripheral - 2 x SATA - 40cm+10cm |